Budding Joy Shower Handle Suction Grab Bars for Bathtubs and Showers
- ATTENTION - The product ONLY works on a flat, non-porous, smooth, dry and clean surface. Can NOT be...
- Easy to Install - Clean and dry the surfaces thoroughly before installation. Press the suction cup...
- Sturdy and Durable - The shower handles is made of plastic, 2 suction cups with strong power, very...
If you’re looking for a safe and easy way to install shower standing handles, the Budding Joy Shower Handle Suction Grab Bars are a great option. These grab bars feature suction cups that attach firmly to smooth surfaces, making them ideal for use in showers and bathtubs. Plus, the grab bars provide a firm grip that makes it easy to keep your balance while showering.
To install the Budding Joy Shower Handle Suction Grab Bars, start by cleaning the surface where you’ll be attaching the grab bars with a mild soap and water solution. Next, moisten the suction cups on the back of the shower handles and press them firmly into place. For best results, position the grab bars at a comfortable height and make sure that they’re level.
Once the shower handles are in place, test them by gently pulling on them to make sure they’re secure. If they feel loose, simply reapply moisture to the suction cups and press them back into place. With proper care, the Budding Joy Shower Handle Suction Grab Bars will provide years of safe and reliable use.
How To Choose a Shower Standing Handle For Seniors
One of the things you should consider before choosing a grab handle for seniors is the intended location. Some bars can only be installed on smooth surfaces, while others need a specific tile size to attach correctly. Ensure that the bathroom handles for the elderly you pick will fit your bathroom well.
Secondly, you ought to consider the ease of installing the bars. Some bathroom rails for the elderly require you to use complex tools for proper installation, while others use simple suction force to attach. Be sure that you can install your chosen device easily.
Additionally, pick a product that can comfortably bear your body weight. However, if you only need a bar to steady yourself occasionally, one with a low weight capacity will serve you just fine.
Finally, pick a product with a good finish. You want a shower standing handle that will add style to your bathroom, not detract from its appearance.
How to Install Shower Standing Handles
If you’re looking for a way to add a bit of safety and stability to your shower, installing shower standing handles is a great option. Shower standing handles provide a firm grip that can help prevent slips and falls, and they’re easy to install.
Some elderly individuals will require professional installation and we have suggestions for these older adults also.
Hire a Professional
If you’re not confident in your ability to install a shower standing handle, you can always hire a professional installer. Professionals have the tools and expertise to get the job done quickly and properly installed, so you can enjoy your new shower standing handle with peace of mind.
There are a few different ways to find a professional installer for your shower standing handle. You can ask family and friends for recommendations, search online, or contact a local home improvement store. Once you’ve found a few potential candidates, be sure to read reviews and compare prices to find the best option for you.
Do it Yourself
If you’re handy and up for a bit of a DIY project, installing a shower standing handle yourself is definitely an option. Just be sure to do your research beforehand and have all the necessary tools and materials on hand. And if you run into any problems, don’t hesitate to reach out to a friend or family member for help.
To get you started, make sure you have the following tools:
- Electronic stud finder
- Power drill
- Tile cutter
- Pencil, marker, or chalk
- Masking tape
Here are our DIY installation instructions:
- Locate the wall studs behind the shower’s surface with an electronic stud finder. Use a pencil, erasable marker, or chalk to draw a line down the wall where you want your shower standing handle.
- Align the shower standing handle as needed, placing it on a marked stud position that should be about three feet above the shower floor.
- Hold the level at or below the expected bar position and check for consistency in terms of uprightness (plumbness) or downward position (level). Mark the point where the shower standing handle’s mounting flanges meet the shower wall. Use the supplied paper template or the shower standing handle to fill in the screw holes with a marker or pencil.
- Drilling pilot holes through each screw hole is important. Use a drill bit that is suitable for the shower lining material and somewhat smaller than the screw diameter required. Place a tiny piece of masking tape over the surface before drilling to avoid chipping and tearing the material if it’s ceramic tile or another similar substance. While boring, apply moderate but persistent pressure.
- If nuts were provided with the shower standing handle, be sure the place them onto the screws first. And then insert the screws into the mounting flange. If any of the mounting bolts miss the framing, use anchors at the end of the screws.
- Caulk the rim around the mounting flange. With the screws placed in line with the screw holes, hold the handle up to the shower wall. Simply drive the anchors into the wall of the shower, slowly but firmly. Make sure to avoid applying too much force to the mount. The screws should be tight yet readily removable with a screwdriver.
- Allow at least 12 hours for the caulk to set before using the shower. Before putting it into use, grab the standing shower handle and apply constant pressure to make sure it retains its position without moving.
Grab bars and shower standing handles can go a long way in enhancing a senior’s ability to live independently. If you are unsure which bar to choose, you could start with any of the products on this list.
Don’t forget to pick a product that suits your needs perfectly; you will not regret it.